Oven repair · Tulsa, OK
A blank display, buttons that beep and do nothing, or an oven that quit right after a self-clean. Each of those has a different usual suspect.
Before you call
Smell gas? Don’t touch any switches. Leave the house and call your gas company from outside. Don’t pull a gas range away from the wall yourself: the flexible gas line behind it can kink or loosen.
What usually causes it
A tripped breaker is the easy case. Behind the range, a loose wire on the terminal block can burn through, and a gas range’s plug can work out of its outlet when the range is moved.
Colby checks the supply at the range and repairs a burned cord or terminal block.
Many ovens have a thermal fuse that cuts all power if the oven gets too hot. The heat of a self-clean cycle is a common trigger, and the oven then goes completely dead.
He replaces the fuse and checks the cooling fan and door lock that should have kept it from overheating.
The board can fail outright, leaving a blank display, or partly, so the panel lights but the oven won’t start. Heat from the oven and power surges are the usual reasons.
He tests the board’s power supply and outputs before deciding it needs replacing.
The membrane pad you press is a separate part on many ovens. When its circuits wear out, some buttons stop responding, or the oven beeps at buttons nobody pressed.
He tests the pad on its own and replaces just that part when it’s the one at fault.
A small motor latches the door for self-clean and should release it once the oven cools. When the lock or its switch fails, the control thinks the door is still locked and won’t run.
He frees the door and replaces the lock assembly or switch that failed.
Questions
AUsually not. The cycle runs the oven far hotter than cooking does, and that heat can blow a thermal fuse, damage the control board, or leave the door lock stuck.
AThat’s your call, and many people use it for years without trouble. If you do, stay home while it runs, and don’t start it right before a holiday meal in case something fails.
AYes. There’s a diagnostic fee for the visit, and if you have Colby do the repair, the diagnostic fee is waived.
AMost appointments are within 48 hours, many within 24, and often the same day. Call or text and Colby will give you the soonest time he has.
Rather type it out?
Tell us what's wrong and how to reach you. Colby will call or text you back.
