CJ Appliance Repair(918) 992-4002

Stove and cooktop repair · Tulsa, OK

Stove igniter keeps clicking?

Tick, tick, tick with every knob off, or a burner that keeps clicking after it lights. It’s usually water, and sometimes a switch.

Repair ticketNo. 4002

My . It’s a in .

Or send it as a requestTexting? Add a photo of the model tag.

  • Colby answers his own phone
  • Most visits within 48 hours, often same day
  • Diagnostic fee waived when he does the repair
Text

Before you call

Try these first

Smell gas? Don’t touch any switches. Leave the house and call your gas company from outside. If a burner is clicking with its gas on but won’t light, turn that knob off.

What usually causes it

What keeps the igniter sparking

01

Moisture in a switch Most common

Water from a boilover or a cleaning runs down the knob stem into the switch behind it and makes it act as if it’s on. The clicking often stops by itself once the switch dries, which can take a day.

If drying doesn’t stop it, Colby finds the wet or damaged switch and replaces it.

02

A failed burner switch

Grease and crumbs work into the switches over the years and short them, so one stays closed even with its knob off. One shorted switch is enough to make every igniter click.

He tests each switch to find the one that’s stuck and replaces it.

03

A knob or stem that won’t return

A cracked knob, or a bent valve stem, can hold the switch in the light position. The knob looks off, but it isn’t quite.

He replaces the knob, or the valve and switch if the stem itself is bent.

04

Flame not reaching the igniter Relighting burners

On stoves that relight automatically, the igniter sparks until it feels flame touching it. A crooked cap, a clogged port or a dirty igniter keeps the flame off it, so it clicks while the burner burns.

He cleans and lines up the burner so the flame touches the igniter again.

05

The spark module

Now and then the module itself fails and sparks without any switch telling it to. When every switch tests good, this is what’s left.

He tests the module once the switches are ruled out and replaces it if it’s at fault.

Questions

Igniter keeps clicking: questions people ask

Q

Why does my stove click when it’s off?

ASomething is closing the spark circuit without you: usually water in a switch, sometimes a switch that has shorted with age. It isn’t the gas; it’s the electric spark system.

Q

When I turn one knob, every burner clicks. Is that normal?

AYes, on most gas stoves. Every igniter sparks together, but only the burner you turned on gets gas, so it’s the only one that lights.

Q

Is the constant clicking dangerous?

AThe spark on its own isn’t, as long as no gas is flowing, but it wears out the module and it means something is wrong. Keep the power off until it’s dry or fixed.

Q

Do you charge to come out?

AYes. There’s a diagnostic fee for the visit, and if you have Colby do the repair, the diagnostic fee is waived.

Q

How soon can you come?

AMost appointments are within 48 hours, many within 24, and often the same day. Call or text and Colby will give you the soonest time he has.

Rather type it out?

Send Colby a request

Tell us what's wrong and how to reach you. Colby will call or text you back.

  • Calls and texts(918) 992-4002
  • Tulsa, Oklahomaand the towns around it
  • Texting?A photo of the model tag helps Colby know what he’s working on.
Repair requestCJ Appliance Repair

Tulsa · (918) 992-4002

Broken appliance? Call Colby.

Call (918) 992-4002