CJ Appliance Repair(918) 992-4002

Washer repair · Tulsa, OK

Washer shaking or loud?

A thump now and then on a heavy load is one thing. A washer that bangs every spin, walks across the floor or roars like a jet is telling you something.

Repair ticketNo. 4002

My . It’s a in .

Or send it as a requestTexting? Add a photo of the model tag.

  • Colby answers his own phone
  • Most visits within 48 hours, often same day
  • Diagnostic fee waived when he does the repair
Text

Before you call

Try these first

If the washer is walking across the floor, stop it. It can pull its water hoses loose or knock into the wall.

What usually causes it

What usually causes it

01

An unbalanced load or an unlevel washer Most common

A lopsided load, or a washer resting on three feet, can make any machine thump and walk. A wood floor that flexes makes it worse.

Colby levels the washer, locks the feet and checks whether the floor is part of the problem.

02

Worn suspension

Top-loaders hang their tub on rods or springs; front-loaders use shock absorbers and springs. As these wear, the tub swings too far and bangs the cabinet in the spin.

He checks the suspension and replaces the worn rods, springs or shocks as a set.

03

Drum bearings A roar in the spin

Bearings behind the drum wear out, often after the tub seal lets water in. The noise starts as a low rumble and grows to a roar at high speed, sometimes with rusty streaks under the washer.

He confirms it’s the bearings and tells you what replacing them involves on your washer.

04

Something loose inside

A coin or underwire caught between the drum and the tub scrapes on every turn. A cracked drum support, or a drive pulley working loose, clunks.

He removes what’s stuck and checks the drum, the support and the pulley.

05

Shipping bolts left in New washers

If the transit bolts weren’t removed when the washer went in, the drum can’t move on its suspension. The whole cabinet shakes violently from the first spin.

He takes them out and makes sure nothing was damaged.

Questions

Washer shaking or loud: questions people ask

Q

My washer roars during the spin. Is that the bearings?

AA rumble that gets louder at higher speeds, and has been getting worse over weeks, usually is. Running it that way can damage the drum and the tub, so have it looked at.

Q

Is it worth replacing washer bearings?

AIt depends on the washer. On some, the bearings can be pressed out and replaced; on many front-loaders they’re part of a sealed tub that comes as one piece. Colby will tell you what yours needs, and say so if a new washer is the smarter buy.

Q

Do you charge to come out?

AYes. There’s a diagnostic fee for the visit, and if you have Colby do the repair, the diagnostic fee is waived.

Q

How soon can you come?

AMost appointments are within 48 hours, many within 24, and often the same day. Call or text and Colby will give you the soonest time he has.

Rather type it out?

Send Colby a request

Tell us what's wrong and how to reach you. Colby will call or text you back.

  • Calls and texts(918) 992-4002
  • Tulsa, Oklahomaand the towns around it
  • Texting?A photo of the model tag helps Colby know what he’s working on.
Repair requestCJ Appliance Repair

Tulsa · (918) 992-4002

Broken appliance? Call Colby.

Call (918) 992-4002